Diode Clipping of Different Bias levels
Diode Clipping of Different Bias levels When the voltage of the positive half cycle reaches +4.7 V, diode D1 conducts and limits the waveform at +4.7 V.…
Преподавате с вериги?
Създайте клас, дайте на учениците си схема за сглобяване и прегледайте предадените работи. Опитайте безплатно с един клас и до 5 ученици.
Изпробвайте безплатната демо версия за класHow it works
Diode Clipping of Different Bias levels
When the voltage of the positive half cycle reaches +4.7 V, diode D1 conducts and limits the waveform at +4.7 V. Diode D2 does not conduct until the voltage reaches –6.7 V. Therefore, all positive voltages above +4.7 V and negative voltages below –6.7 V are automatically clipped.
What's inside
- 2× Battery
- 1× Power Source
- 1× Resistor (994 mΩ)
- 2× Diode
- Measured with Oscilloscope
